Friday, August 17, 2018

Leather Weather 2.0


Over the past five and a half years, I’ve had the pleasure of sharing my ventures into doll fashion creation with all of you. When I start this blog there was very little Information on 1/6th scale clothing construction so I found myself often making things up as I went along with nothing but basic dressmaking to back me up. As I quickly discovered, many of the rules for making full sized clothes must be modified for the doll…particularly when it comes to specialty items like….leather wear for example.

In 2013, I did two posts on the subject: “Warm Leatherette,” working with vinyl, then two months later, “Leather Weather." I explored working with real leather and literally glued each garment together. This exercise gave me a clue as to why doll companies do not sell leather clothing. And while those two posts satisfied my dolls’ appetite for full-sized women’s leather goods, it was far from perfect. Over the last few years, however, my leather work has improved! One fine day, while admiring the work of another artisan on Instagram, I learned her secret to making consistently good leather wear.

Thin is in!
“I use glove weight, kidskin leather,” a friend told me. “It sews just like fabric.” Yep, the success of leather goods for dolls depends on the quality of leather! Of course it would!!! Skins that are between 1/64-1/32” is perfectly scaled to the doll! But where to find it? Me, I’m lucky. Each time I’m in Paris I head for my favorite store: “Au Gentlemen des Cuirs (4 bis, rue d’Orsel), situated in the fabric district where I can buy small scraps. BHV-Le Marais department store in Paris, also has a bin of leather scraps in the basement! And..the last time I was in New York City, Mood Fabrics (225 W. 37th St. 3rd floor)  had a small box of scraps where a found a few interesting skins. Otherwise, search online for “thin leather.” I found a vendor, Rio Rondo who, besides its very “cowboy-general-store” catalog,  also caters to miniature leather crafters. They sell a product known as “Skiver” (thinly shaved leather) sold in squares. There is a limited number of colors, but they say all of their products can be dyed. I also took a peak at an old, American brand, Tandy Leathers which sells something called “Lining Leather.” These are paper thin skins used to line the interiors of wallets! Like everything else, there are vendors on Etsy and EBay. Do a search for “thin leather” then look for 1oz weight, though 1-1/2 to 2 oz (a little easier to find) is okay as well. If you don’t see any indication of the leather’s weight….don’t buy it because it is probably too thick!

Lay It Out
Leather as thin as fabric means you can make just about anything. Glove weight leather will drape around the body with ease and can be fashioned into high fashion looks. Slightly thicker skins mean you should stick to a super simple pattern with few pieces. Princess seaming is not only okay, it’s a great way to get a good fit. Unless it’s a pattern you’ve used it before, make your garment in muslin first to ensure everything fits.

Leather has no real “grain,” but it does have stretch. You don’t have to worry about each piece laying exactly straight, but you will want to ensure each piece has stretch where you want it.

No placing a pattern on the fold. Use single piece patterns (the back all in one piece, for example) instead. You cannot pin your pattern to the leather. So place your pattern on the backside and to trace off the pattern with chalk.

If there many pieces, number each one so you know what goes where and what side is up when ready to assemble.

Use very sharp shears to cut. Use tape or clips to hold the ends together as you assemble.

For thicker leathers (1.5-2 oz), choose patterns with as few pieces as possible. My simplified one piece skirt pattern is still a favorite!


Sew It Up

The wonderful thing about super thin leather is that it sews as easily as fabric on a regular domestic machine. Use “leather” needles (12/80) which are wedge shaped and super sharp to keep from ripping the material. You’ll also want to use a slightly longer stitch than usual.
1 & 3. If you have a Teflon or roller foot for your machine, all the better, otherwise you can improvise by putting a bit of scotch tape on the bottom of your regular pressure foot. This helps to keep the leather sliding without getting stuck.
2. Tape your pieces together and just before the stitching arrives near the tape, remove it and continue sewing.
5. Or place the tape on the sides, out of the way of the stitching line.
6. Personally, I have not had those issues. Instead I usually have problems with the leather getting stuck on the bottom feed plate. put tissue paper on the seam lines and sew. Rip away when you are finished. I should point out, there are no “do-overs.” Once the needle pierces the leather, it’s leaves a hole. So be really careful. Tip: Angle the end of the seams near intersections so that when you sew, there is less bulk to sew through.
 6b. You cannot iron the seams flat (and even if you can, they'll still pop up), so apply rubber cement to the seam and the area it will fold onto. Let the rubber cement on both surfaces dry a bit.
7. Press the seam open with your fingers and press down.
8. This is what it looks like on the right side.
9. Angle the seams near points of intersection. This helps reduce bulk at points when you have two sets of seams coming together.

Of course straight seams are easy. But what happens when you add sleeves??!!!

 1. This is why thin leather is way better. It is easier to control! First, be sure to turn up the hem of the sleeve and use rubber cement to hold in place. Then use a threaded needle (double thread, knotted at the end) and a thimble. Using the same color thread as your garment, make a running stitch on the cap of the sleeve. Gather slightly.

2. Place tape to hold the sleeve onto the garment armhole.

3. Again, using a threaded needle and thimble (to protect your finger as you push the needle through the leather), baste the sleeve to the garment using a running stitch. Stitch the sleeve cap into the jacket as usual.
4. Fold the garment down, matching the underarm seams and tape. Then sew as usual.

5. Put a pencil through the sleeves. Apply the rubber cement along the seams.

6. Press the seams open.
7. Attach a safety pin to the seam allowance of the sleeve hem. Close and push the pin through the sleeve until you can take hold of it on the other end.

8. Pull the pin through.

9. Keep working it until the sleeve is right side up. Remove the pin.

Finish it off

Most of the leather clothes I make for my dolls are unlined. I feel the leather is bulky enough without adding another layer.
1. Leather doesn't fray. I've simply turned down the edges starting with the hem. On the front edge of the jacket, I trimmed away that little bit of the hem that overlaps front edge.
2. Fold (and glue) the front edge.
3. Trim away the part of the front edge that extends beyond the hem for a clean finish.
4. For curved edges, clip before folding over.

As I stated earlier, you are not obliged to finish off the edges or the hem. It all depends on the look you are going for.
Princess seaming adds shape and fit to the jacket. The leather is thin enough to drape a sarong skirt. Even though I have not turned up the hems of either, the suit still looks complete.
For the sake of this project, I decided to line one of the dolls' existing jackets.

Remember, linings add structure and bulk. So you might want to reserve them for more loosely fitted or more tailored garments. If you are using a super fine leather, you can do a edge to edge lining the same way you would do for a fabric garment.  For Vanessa's jacket, however, my leather was a tad bit thick (2oz) so I decided to use a method I noted in one of my own leather jackets. The idea behind this--when you dry clean the jacket--different chemicals are used for the leather and others for the lining. Also, the lining will become soiled before the outer part of the garment. I am using this method because it makes stitching the lining in by hand easier on the fingers.
1. Use bias tape or cut a 1/2" (1cm) bias strip of cotton fabric. Hold in place with tape. Or here...I've used those doll-sized clothes pins.
2. Baste the tape along the neckline.
3. Put rubber cement along the seam line of the neckline, leaving the fabric loose. You are gluing down the seam but not bias strip. Make two more strips and baste to the front edges of the jacket. Fold and glue the edges down.
4. When you are finished, the inside of the garment will resemble this.
5. Make your lining. Finish the hem. Then fold and iron or baste the edges down.
6. Pin the lining to the fabric strips around the jacket, adjusting it until it fits the inside of the jacket. Sew the lining onto the fabric strip with the exception of the hem. Leave the lining to swing free from the hem of the jacket. Tack the seam of the lining sleeve to that of the jacket sleeve. (If you are making a jacket with set in sleeves, you can omit the lining sleeves, turn the armholes down and lining to the armhole seams of the jacket.

Of course, you could forget about the lining and simply leave the edges as is!
You'll still end up with a pretty good looking garment!

Closures
You can still use velcro to close dolly's leather wear if you so choose. But you have other options as well.

 1. For front closing garments, you can always use buttons and buttonholes! Here, I use brads (found in craft stores). Bend the stems to leave a little space between the surface of the jacket and the head...which, by the way, you can paint to match the garment.
2. Cut tiny slits (with a razor or seam ripper) on the opposite side of the front opening, just wide enough to bring the button through! Instead of buttons, you can always thread small bits of leather through a hole then knot on both sides to create your own buttons as well!
3. This jacket was made using a vinyl square I found at the craft store. The same rules for making leather garments apply to faux leather, plether or vinyl! I used a brad for the button.
4. For this jacket where the jacket meets together at the center front, I didn't have a separating zipper, so I hand sewed in a tiny hook and eye.

Collared!
Collars present another challenge. Unless you are working with very thin leather and can add a facing to the collar, there is a shortcut.
1. The shawl collar is an ideal solution for when you want to add a collar.
2. This is a modified version of the shawl collar used to give the illusion of a notched collar (found in many tailored jackets). It is the same as the shawl with a notch cut out. What I have done is to start out with a V-neck collarless jacket.
3. I draped this collar around the doll's neck to get the shape and with width I wanted to come up with this pattern. I have put a center back seam so I can adjust it if necessary. But if you know the collar is a perfect fit, you can easily make a pattern where it is in one piece without that seam.
4-5. The collar is then added to the jacket along the neckline. I lay the collar wrong side up against the underside of the jacket and topstitch in place. I turned down (and glued in place) the outer edge of the collar. When you are finished, the collar is rolled back over the neckline and looks perfect!
6. Again, this leather was a tad bit thick, so I had to hammer the edges (and seams) flat. Place tissue paper over the inside seams then use a mallet or hammer to bang everything flat.

Pockets
Buttonhole pockets in leather garments are very easy to create and they look great!
1. Start out by first deciding on the width of your pocket. Then, using a blade, carefully slash the placement of the pocket. Cut out a small square, the same width as your pocket with. For the final length of the flap, you need to multiply 3 times. Fold two-thirds and glue, leaving one-third free.
2. Slide the flap through the slit upwards. Diagram #2 shows what this looks like on the inside of the garment. The flap is facing upwards. The red lines indicate the part of the flap exposed on the other side.
3. Right side up this is what it looks like. Glue the top part of the flap to the inside of the jacket. Note: if you include a vest pocket, the flap goes in the opposite direction. That is, the flap points upwards on the outside (downwards inside). 

Hammer Time

With super thin leather you can iron the seams on a low setting (cover the leather with tissue paper first), but for anything thicker (2 oz) it’s best to glue down the seams and hems with rubber cement then hammer it flat. Again, protect the leather by putting a cloth over it before hammering.


Finish it Off
The jean jacket in metallic leather! The level of detail makes this jacket something special!

Assuming you have a steady hand…topstitching adds a nice finish to structured styles (jackets, coats). Tip: If you’re adding patch pockets, it’s better to topstitch them first then glue or hand tack them in place on the finished garment afterwards.

Patch pockets are tricky! Here's a tip. Cut the pockets out and top stitch them before you put them onto the garment. Then simply tack them in place. This way, if you make a mistake, you don't ruin the entire garment!


Finally....everything we discussed today....can be applied to faux leather! But just remember to choose those which are lightweight and scaled to the doll!

All text and photos property of Fashion Doll Stylist. Copyright 2018. Please ask permission before reposting. And please credit us. Thank you!

Follow us on Twitter: @FashDollStylist
Like us on Facebook: @FashDollStylist
We're also on Pinterest: @FashDollStylist
And of course, we are on Instagram: @fashiondollstylist





Tuesday, July 31, 2018

Applied Arts: Beading Basics 101


I take suggestions for projects seriously, so when Kamelia left a comment saying "maybe you'll make a beaded dress some day," I decided to delve into the subject matter especially in light of all the beaded dresses we saw during Haute Couture week. Disclaimer: I am NOT an expert in this field. Years ago I did a weekend workshop held by Elisabeth Roulleau, who studied at the world famous school of Lesage. She is a professional, skilled in Luneville embroidery (otherwise known as Tambour embroidery). I should have taken a basic course in English embroidery first. Beading was very challenging and I was a slow learner. Luneville or Tambour embroidery entails using a minuscule crochet hook and a frame over which fabric is held taunt. The "hook" is pushed up through the underside of the fabric catching a line of stranded beads you hold with your other hand on top. Essentially it is a form of crocheting the beads or sequins to the fabric--a method used by the world famous embroiderer, "Lesage." When completed, the back of the fabric is as beautiful as the exterior. That is NOT what I'm doing here today. Instead, I am taking on a somewhat easier method--needle embroidery. Though it is easier, it is still challenging and time intensive. But like anything else---it takes practice.

A while ago, I did a post on "faux embroidery" and another on clever ways to use beaded fabric where I carefully cut out lace medallions and stitched them onto an existing dress as a way of creating the illusion of luxury embellishment. I still hold fast to that idea because it is a quick and easy way of getting the look--especially for beginners just getting used to needle and thread. Beaded embroidery of any variety is an art. And like other forms of art, mastering it requires.....TIME and PATIENCE!!! Two things I'm usually short of! This project took me FOREVER! It takes a lot of thought and planning! And should you miscalculate--let's say the beading on a sleeve is too thick, for example.....well, you've just lost another day! I made many mistakes. It took me awhile to control the stitches. There are many imperfections here. But the good news.....beads are beautiful The mistakes are also beautiful! 


SUPPLIES
It's not about needle and thread and handful of plastic beads. What you put into this project is what you reap! Everything must be to scale which makes this all the more challenging.

1. There are different types and sizes of beads. Pictured here are "tubes," the long narrow beads usually sold on strands. 
2. Seed beads are sold in packets, small tubes or containers. They come in different sizes. The larger the number the smaller the bead. These silver beads are size 11 which I have found to be the largest bead you will want for doll clothes. And even then--you will want to go lighthanded because this is large for a 1/6 scale dress.
3. Beads also come in strands like these (size 11/0) red beads. You will want to buy decent looking glass beads for the best results. 
4. These black beads are size 13/0 which, I feel is a perfect scale for the doll. My craft store had beads as tiny as 15/0. I did not buy those because you will need to also find needles and thread fine enough to thread them! 
5. Thread is another important factor. As you will notice next to it, beading needles are not only fine, they have very tiny eyes. Most thread is way to thick. Experts recommend nylon or silk thread. Pictured here is a spool of silk thread which threads into my needle without any problem. But silk thread comes at a cost! Though it's not on the recommended list, I discovered that "invisible" or "transparent" thread is also a good choice. It's hard to see and even harder to knot, but it threads like a dream and solves the other issue which is---the thread should perfectly match the bead!
6. You'll need to go to a crafts store to find beading needles. The needle to the left is a #9 embroidery needle which is a little easier to find. Though it looks quite thin, you will soon discover those tiny 13/0 beads won't pass over the eye! Still, for the larger beads (#11/0) it works. What doesn't work--sharps!!
7. The embroidery needles are super thin and bend easily. Forget about using a needle threader. You need magnifying glasses, also recommended while beading. The beading needle here is size #12 (the thinnest my craft store carries) which I used for the 13/0 beads used to create the black beaded flon the black lace top below.
8. Again. Thread is important. Pictured here is "transparent" thread. I used both the silk and this one. Silk thread has more tooth, but transparent thread is way less expensive. This is where I felt I could honestly cut back a little.
Do you really need an embroidery hoop? It depends. They are ideal in that they keep the fabric taunt which makes it easy to control the execution and tension of your stitches. When I used a heavy lace as the base, I was able to add the beads without problem. On the other hand, if the fabric or lace is fine, you really need a hoop to keep the stitches from "shrinking the fabric" as you embroider. 

Let's Get Started
This is how you always begin.
1. Use a double thread for strength, knotted at the end. 
2. On the underside push the needle through to the right side.
3. Very close that point, push the needle back down to the under side.
4. Bring back up to the front and knot.

A Stitch in Time
So that you can see these techniques best, I'm using much larger beads, needle and thread than are normally employed. 

The Beaded Backstitch
What is interesting about this stitch is that I learned you don't have to sew beads on one by one. You sew them down in clusters, only tacking down a few at a time. With this stitch, you decide where the end point is going to be and then you go back and tack the last two or three beads. Don't sew from side to side, but rather, up and down though the fabric (like a sewing machine), trying to keep the needle as straight as possible.
1. Start out by knotting and securing the thread as we just showed you. Then bring the needle up to the right side of the fabric. Load on your beads (3-6 at a time is ideal). Lay the line of beads down and insert the point of the needle at the end of the line and push through to the back.
2. When you pull the thread through, it looks like this.
3. Bring the needle straight back up with the point coming in between the last two beads of the line.
4. Slide the needle through those two beads.
5. Reload by adding more beads and repeat the process until you have arrived at the length and look you are going for. Push the needle straight down after the last bead and knot on the underside.

This is a great basic stitch for almost everything!

The Loop
This starts out the same as the previous technique but the endpoint is the same as the start point of the beads.
1. Start out the same as you did before with the thread knotted and secured. Load enough beads on to form a circle.
2. Insert the point of the needle at your original start point (at the base of the first bead). 
3. And push the needle straight down. A loop is formed.
4. Bring your needle back up with the point positioned in between the third and forth bead. Tack the thread down with a tiny stitch. Repeat. Position the needle point between the sixth and seventh bead, etc.

This is a great stitch for making simple designs with a bead in the middle like the lace tent dress below.
1. I sewed on a pearl in the middle of the lace flower.
2. After securing the thread with a knot, I loaded my needle with enough small beads to encircle the pear.
3. You can secure the loop by either tacking down the thread in between every two beads using the backstitch method.
4. Or you can tack down the thread in between every two stitches with tiny whip
stitches. 
The end result is subtle, quite pretty and achievable for even the least experienced seamstress!

Fringe
Nowt his is really a lot of fun. Each strand you create can be as long as you want. But a note here: the longer the strand, the more adjusting you will do to work out the lag in the thread.
1. Start off the way you did when you were doing the backstitch. Bring your knotted thread to the right side and load up your needle. You can add whatever number of beads you want for the dimension of fringe you wish to create.
2. This time you will not be stitching the end down. Instead, leave the last bead free and push your needle through the remaining beads and back out of the first one. 
3. Pull the thread up so there is no slack and the base of the beads are lined up next to the origin of the stitch.
4. Push the needle through to the back and secure. You now have a free swinging fringe.


Crouching
When you stitched down the thread in between beads--that's called "crouching." Using this method, you are basically sewing strands of beads in place. Another interesting (and basic) method of applying beads to a pattern or design. Seed beads often come in strands which most likely won't be the exact length as needed. So you will need to get the beads off the strands without scattering them everywhere. 

1. Carefully remove a strand from the shank of beads. Find both ends and simply pull them away from the rest. Hold on tightly.
2. Tie a knot around one end of a single bead. This will stop the others from sliding away. Keep the other end open.
3. Take your threaded (and knotted) needle and slide it in the middle of the threaded beads. Push the beads onto the needle with your finger and then down onto your thread until you have your desired length.
4. Slide the thread of the strand away. Knot your new strand when you have arrived at the desired length.

1. Position your beads on top of your pattern. I used a regular sized pin to hold in place. But this may get adjusted as I work to conform to my pattern.
2. Separate the beads every 3 or so beads and make a tiny whip stitch around the thread to hold in place.
3. This is my result. 
4. Here are the four techniques I used today.
I had a little fun with Christmas ribbon to create my "Oscar" dress. The lines on the dress are made using the back stitch method with beads that match the gold edges of the ribbon.  There is a touch of fringe on one side of the dress. Going down the center of the sleeve are both the back stitch and the loops. The collar came about as the result of a fail. I had originally beaded  piece to be used on a sleeve. This took me the better part of a day to embroidery the lines of beads you see here. But the beading was so heavy and thick, the doll appeared as though she were wearing a beaded plaster cast! Not wanting to lose a day's work. I turned this piece on its side, wrapped it around the doll's neck and fasten it together with hook and eyes!

Take a Tip

1. Start small. The tiny embroidery in the middle of the lace medallions on that white tent dress is a perfect start. It's a way of getting a small taste of this art at minimal expense and time.

2. Designing patterns for embroidery is extremely difficult. Often, what it looks like on paper can be very different when spelled out in beads. I recommend using lace as your base then tracing around existing patterns with beads. 
It's called "re-embroidered lace." For this project, I decided to make my own beaded appliques. I cut up an old blouse and took out needle and crystal beads.
1. Knotted needled is pushed up through the lace and loaded with beads.
2-3. Using the loop method, I was about to trace the contours of the flower.  
4-5. I stitched down the beads using the crouching method.
6. After completing each motif, I knot the thread on the wrong side.

I repeated the technique, using silver beads for the middle of the flower. Here's the floral medallion before and after! I made several of these which could be used to transform existing dresses into little works of couture.
Or think about using touches of embroidery on sleeves pant legs
But them you know me.....I had to have a full dress. A lot of thought went into what I thought it should look like!
 I began with a strapless sheath made from beige lace. I was quite generous with the beads so when I put each medallion on the doll, I discovered how chunky each one was. The dress did not have a good balance with the medallions were place on top. So I chose to scatter them below the waist towards the hem. I added beads to the dress itself, tracing around the hem and around a few of the smaller motifs near the bust. I added beaded strap and a little bit of fringe to give the dress a 1920's swag.

I learned an important lesson here. The bigger the bead, the fewer you should use. Otherwise things have a way of getting very heavy which is not flattering at all. You can use heavier doses of the tiny beads 13/0-,14/0 or 15/0. But be prepared to spend more time with smaller, thinner needles!

I will probably revisit this subject again in the future, but in the meantime, if this is where your passion lie, there are many fine tutorials by folks more skilled in this art than I on YouTube,


All text and photos property of Fashion Doll Stylist. Copyright 2018. Please ask permission before reposting. And please credit us. Thank you!

Follow us on Twitter: @FashDollStylist
Like us on Facebook: @FashDollStylist
We're also on Pinterest: @FashDollStylist
And of course, we are on Instagram: @fashiondollstylist

Saturday, July 14, 2018

Dolls' Eye View: Paris Haute Couture Fall '18

Haute Couture is Back!!! I had nearly given up on this form of fashion because to my style weary eyes--it had lost its direction, lost its charm and possibly, lost the precious few hundred women that make up its worldwide clientele as well. In contrast to the couture weeks that boasted 22 members and about two or three invited foreign houses from 30 years ago, today there are only a handful of real French couture houses that participate. To help fill up the week, there are "invited guests." Sadly, most of them, as well as the public, the press (and perhaps even many of the customers) have not a clue as to what all the fuss is about. French Haute Couture is governed and protected by strict laws over everything from the number of workers employed right down to the number of required private shows that must take place seasonally. But more than a set of rules, couture was always about the preservation of an art synonymous with rarefied elegance and luxury. Couture was also the vehicle designers used to work on ideas and concepts later to be adapted and developed into the ready to wear markets. Like a Lamborghini, yellow diamond, or a Stradivarius violin...Haute Couture should make you dream!

Just as I had decided to stop taking the girls to couture shows....Paris delivered up some good old fashion glamour, over-the-top, luxury, drop dead gorgeous, fab, fab fab couture gowns...just like the olden days of a decade ago!!!! As a result, I was inspired. This report is a little longer than usual. I made more dresses than usual. If you are looking to make a really special dress for dolly...NOW is the time. Here, let me give you a few ideas!!!

Salute to the Suits
Once upon a time, daywear existed in Couture. After all, we are talking about a lifestyle where madame is part of the ladies who lunch and needs something to wear on the way to her fundraisers. Currently there is very little. Still, we can always count on Karl Lagerfeld and his made to order tweed suits for Chanel! These are pretty simple. The sleeves have slits that show off elbow length gloves. While I was tempted to make one of these suits, my dolls were nudging me to concentrate my efforts on......the evening gowns!

Swing Time
There are not a lot of short dresses either this couture season. But what we saw had a lot of swing and sass to them! Think fit and flare where the bodice snugly fits the body in contrast to a gathered A-line skirt with lots of fabric.

Family Jewels
In this case, color is the main story here. Think deep, rich jewel tones when choosing fabric. Ruby, amethyst, tourmaline, sapphire, citrine...it's like squeezing the colors out of a jewelry box and onto some pretty luxurious fabrics. 
Here, Nathalie is all dressed up and on her way from the Givenchy show to the opera! She loved the contrast between the sapphire blue sequinned skirt and a simple, black velvet top....and the contrast between the super simple 2-piece ensemble and the cape with power shoulders and a train!

Fancy Pants
Here is the fanciest way to wear pants to the ball! Cut them out of velvet and wear an embroidered bolera....or cut them out of silk and team them up with a waist length velvet jacket. But our favorite is the swashbuckling silhouette of a full over skirt swirling around the legs or....a long train falling from the shoulders of an embroidered top!
Oh, there were many discussions in the house as to which one of those looks I'd make! If I listened to my girls....you'd still be waiting on this post!!  For Lynn, I settled on this pants ensemble, cut from midnight blue taffeta. It's a simple bodice with a ruffled treatment I recently featured. It's worn over stovepipe pants and a circle skirt opened in the front. Since the fabric is dark, it is pretty easy not to see the beaded embroidery on the top and the sides of the pants. 

Flights of Fancy
These are lots of classic party ballgowns in a variety of fabrics and treatments. Short and long lengths coexist in the same garment; tulle is worked in a few festive ways including ruffled tiers with sparkling edges. But what I really love is when you take a traditional couture garment and translate it into another culture.
Grace shows what happens when you mix French couture with an African print. For her dress, I used a stylized tiger stripe made of velvet. 

My Fair Lady
It could have been lifted from the black and white day at the races of the movie "My Fair Lady." Except, here, the styles have been modernized for 2018! Black and white...what could be more dramatic or elegant! Note: If the Givenchy gown looks familiar...this dress was inspired by Audrey Hepburn's (red) gown from the movie "Funny Face" filmed at the Louvre!

One-armed Bandits
One very strong trend we noticed throughout the week....one shoulder dresses executed in a number of ways. Of course there is the class silhouette sometimes with an embellishment on the sumit of the shoulder. But there we also love those dresses with a single sleeve as well.
For Margot, our newest model making her debut appearance here... nothing beats the allure, the class of Armani Couture. For her, we kept it simple..in black stretch velvet with a supersized black orchid on her shoulder!

Curls & Swirls
Not only are things swinging, silhouettes are also curling and swirling about the body. Look out for flounces, peplums and even giant swirls that form flowers or simply curve around the body.

Seeing Red
In a sea of black and grey gowns....nothing stands out from the crowd than a flash of....RED! Lace, satin, silk....embroidered or plain.....anything red is regal!
And quite naturally, my flame haired doll, Sybille begged me for this dress. Making it was easy. This is a one shouldered sheath dress cut from red lace with a circle of silk that falls asymmetrically over the hips in the back.

The Black Lace Brigade
This is the season for black lace! Stretched over the torso, lined, beaded or "re-embroidered," all forms of lace are big this season. Some looks leave the body to peak out from underneath, while others are totally lined with the lace serving to add texture.

Sheen On!
If it's not lace, it's time to shine. Here the fabric tells the whole story. Silhouettes are relatively simple with lots of flare, lots of drama. What really makes the look is fabric with a high degree of sheen. Note how many of these looks have A-line silhouettes. It's about choosing a simple pattern so that the fabric can speak for itself!
I saw this fabric in a Paris store and fell in love with its bronze sheen. You don't need anything extravagant to create such a super dress. Just a simple cut which helps deflect the light in subtle ways around the edges.
A slightly more glamorous translation of the same theme.... I used a silver ribbon for Arianna's strapless sheath dress and silver lam for the stole. But this is the perfect pattern for really fancy (and expensive) fabrics. 

Very Versailles
In the real world, a couture gown can go from $50,000 to as much as madame feels like spending depending on the embellishments. This is a million dollar theme featuring beaded fabrics and abundantly embroidered laces. You know that section of your fabric store where you wish you could make a dress? Now is the time to splurge... And here is what you do with those super precious beaded remnants!!! Hint--Keep it simple!!!!
There were two ways I handled this theme. For Jourdan's dress, I cut the bodice out of trim which I later added beads (either singular or applied motifs cut from beaded fabric). The skirt is the "typical" draped couture skirt opened over one thigh. I also used a bit of beaded trim to the opening of the skirt. Here's a hint: look for embroidered remnants, beaded trims found in vintage stores and antique fairs!
And then there was that very special sale at my favorite fabric store where I was finally able to buy a bit of beaded lace! The beaded lace in Laeticia's dress is grey. It slides over a black foundation worn underneath. To simplify execution of the dress, I used a separate grey lace trim for the sleeves. 

Yes She CANNES!
Continuing on with a glamour theme.... gowns in powdered tones swirl, float, drip down from the hips. Dolly is a movie star and her dress should be the first thing that gives that away. Think about using lots of sheer fabric--the more the better. Add spritzes of sparkles sequins, beads or feathers to give it that super-star quality. Just dream and let your doll take center stage with any of these looks!
Ingrid is wearing a bustier made of pale blue tulle molded to her torso in silver sparkle. It's worn over a matching blue skirt cut from five layers of tulle.

This dress did not fall into any category, but Nichelle fell in love with it and insisted I include it. The dress starts with a silver metallic bustier. Admittedly, I made about for of these as I tried to imitate the look of metal. I did make a  molded silver tone (oven baked clay bustier however....too thin it broke....thick enough--it added too much bulk. So I ended up using aluminum foil! The dress is made in three pieces...the top is a bodice of draped silk over a slim skirt. The front drape is added to the waistline.

Follow us on Twitter: @FashDollStylist
Like us on Facebook: @FashDollStylist
We're also on Pinterest: @FashDollStylist
And of course, we are on Instagram: @fashiondollstylist