Saturday, November 21, 2026

Starship FDS: Coin Toss


 Penny for your thoughts....

The girls are on another grand exposition....this time in search of coins.....

We're still working in foil. Still using circular shapes. But this time we've added in some metallic fabrics employed as a foundation.

Before we start... For this project, you will need more foil, metallic thread and a little bit of fabric. I tried the so-called "heavy duty aluminum foil" but it was still too flimsy. I went to my craft store looking for foil, but what they sold was foil to transfer metallics to fabric. So..... you will need to find something with a bit more body....like the foil liners found in coffee cans, cans of nuts, etc. 

This was a labor-intensive project which is why it took me so long to post. I have cut all of my paillettes by hand. But feel free to invest in a hole punch especially if you want your paillettes to be more uniform with sharper edges. 

This is such a cute dress, borrowed from the 1960's. You don't have to make this in silver foil, It would look just as cool in any time of material.

1. I began with my foil and traced around a 1-cent coin to get the size I wanted. Eventually, if you want to copy this graduated look, you will need to cut two smaller sizes. Though it takes a lot of prep time, the advantage to cutting these out yourself is that you will always have enough paillettes and enough in each size!




2. Create a basic dress and make sure it fits your doll's body perfectly.

3. Sew only the darts and side seams, while leaving open the shoulder and center back seams.

4. Mark the rows where the paillettes will be added up to about the hips a running stitch in a contrasting thread.

5. Begin adding the larger paillettes, layering one over the other while staying clear of the center back seam.

6. When you have arrived at the waist, take one of the medium sized paillettes to see how far above the larger ones it should be placed, then mark the placement with running stitches up and just over the bustline.

7. At this point your dress should resemble something like this. Cut one more size of coins. I used a standard document hole punch. They are about the size of sequins.
8. Just before you add those, let's close the back of the dress. Carefully slide the paillettes away from the back seam then fold one edge of the center back over the opposite edge, meeting at the center back seam. Be sure to leave enough space from the neck down so the doll can get in and out of her dress. At this point if you intend to add a lining, now is the time. Join the lining to the dress along the neckline and a little down the center back. Whether you line the dress or not, add a hook & eye closure at the top of the neck.

9. Now add the smallest paillettes (or sequins) from over the bust to around the neckline. 


Below is the completed dress, front and back.






Silver Dollar Jacket

This spectacular look was inspired by an iconic silk fuchsia jacket by Valentino. For my updated version, it is made using silver dollar sized paillettes stitched to a waist length silk capelet. The jacket is worn over a simple foil corset and floor length pencil skirt.


1. I used the cape pattern, cutting it short, just above the hips and fitting it somewhat snug against the body. There is no overlap at the center front. The jacket is made to be worn opened with a small tie underneath to keep it on dolly's shoulders. I will advise lining this cape. So you will need to cut a second cape.

2. Because I didn't want to add strain to the cape foundation, I decided to attach the dollar coins onto a ribbon I made out of the same fabric. It's easy. Cut a strip long enough to wrap around the cape. My ribbons were about 3/4 inch in height. Using a glue stick, add a small layer of glue all along the length, then fold each edge towards the middle. Press.

3. Wrap around the cape. and pin in place The first ribbon is placed a little below the shoulders. The second one is just about the hemline. The ribbons should extend the center front by about 1/2 inch.

4. Mark the center of the ribbon with a pin. Place a paillette on each end. 
1. Glue the ribbon to the middle of the paillette on each end.
2. When turned over, it will look like this.
3. I put a small stitch where the paillette meets the ribbon to ensure it will remain in place.
4. Position the next paillette about 1/8 inch away and stitch to the ribbon.

5. Keep adding paillettes until you reach the center of the ribbon.
6. Then, begin adding paillettes at the opposite end towards the center.
7. Take one paillette and fold it in half. When you arrive at the center, you will add it and attached with a stitch in the center.  In other words, you will be working both sides to the center then insert a folded paillette sewn in at the center.
8. This allows the movement of the row to flow towards the front.



9. Place the row of paillettes on the upper part of the cape and pin in place. When you are happy with it, place the second row and make any adjustments. Hand sew the rows of ribbons onto the cape. Afterwards, cut several penny sized paillettes. These will be added near the neckline.


10. Hand stitch directly to the neckline of the cape.
11. If there are gaps between the top and the second row, you can add additional paillettes, one by one as needed.


12. Add the lining to the inside of the cape. You can add small straps near the neckline to help hold the cape in place. 

Front to back...a metallic masterpiece.

Variations of a theme.


Putting together this post was a LOT of work which you may or may not want to do. You can take shortcuts. You can purchase ready-made paillettes, add them onto sequined fabric, or use them as accents or trims. For example.....


A simple minidress covered with 3D large sequins is another way to get the space age look. We used a small tube of stretch lurex and stitched on rows of sequins placed side by side. 

Anna wears this as a mini dress but also as a tunic over basic straight trousers and a basic jacket cut from metallic fabric.

The girls have got one more party planned at their outer space adventure. Coming up next is part two of our three part series: Starship FDS: Last Lunar Ball


Like us on Facebook: @FashDollStylist
We're also on Pinterest: @FashDollStylist
And of course, we are on Instagram: @fashiondollstylist


Unless otherwise noted, all images and text of this blog are the copyrighted property of Fashion Doll Stylist 2026. We are independent and not part of any other group or website no matter where this post or its elements appear on the internet or social media. Please request permission before reproducing any parts of this post. And please, always credit us.